Selecting the Right Retrofitting for Your Mobile Mining Equipment

Those involved in mobile mining know that super-large, hydraulic equipment plays a major role in discontinuous surface mining operation for solid (hard rock) commercial minerals. This includes a wide range of equipment including off-road haul trucks, hydraulic excavators, shovels, dozers, and front loaders. Growing worldwide economic pressures in mining and 24/7/365 schedules have made the […]

What is a Double Seal and When to Use One (Double Seals: Part 1)

Learn more about when to use double seals and what setup you should consider.

How to Select Protective Coatings for Mining Equipment

Protective coatings are primarily used in the Mining and Ore Processing industry for the wear protection of metal equipment. The most common wear issues in this industry are abrasion and corrosion. When you are selecting a protective coating option, there are many technologies available. Defining the needs of the application will simplify the selection greatly. In […]

An Introduction to the Five Key Features of Good Mechanical Seal Design

Mechanical seal designs come in a wide variety. These designs differ in the way they are driven, the choice of secondary seals, and the location of the springs. Mechanical seals have all been designed to meet certain criteria in terms of application, cost, fit, ease of installation, and capability to seal. There are, however, a few […]

Mechanical Seals & Equipment Conditions—Basic Rules

Does the condition of the equipment affect the life and performance of the mechanical seal? The answer is yes. Equipment conditions play a very important part in determining overall seal life and reliability. Typically: Mechanical seals are installed onto a rotating shaft and designed to prevent visual leakage Two highly polished, spring-loaded “seal faces” come in […]

The Basics of Industrial Lubricant Selection

There are several factors to consider when selecting the right industrial lubricant. A manufacturer’s recommendation is a great starting point, but it doesn’t have to be the only option. Most manuals are written for ideal conditions, but these guidelines don’t address the real environment in which the equipment is being used. What if your equipment manufacturer […]